FloorCare London

STONE FACADE RESTORATION

Professional Stone Facade Cleaning London

We restore the natural colour and character of Portland stone, limestone, sandstone and granite building facades across London — lifting decades of pollution staining, algae and carbon deposits without harming the stone beneath. Fully insured and trusted on commercial and residential buildings throughout the capital.

Before
After
Fully Insured
Commercial & Residential
Eco-Friendly Methods
Free Site Survey
London-Wide Service

THE TRANSFORMATION

See the difference proper stone cleaning makes

Years of London grime settle into the pores of natural stone, dulling its colour and hiding the detail in mouldings, string courses and window surrounds. Our multi-stage cleaning process lifts embedded pollution and biological growth to reveal the stone’s true tone, restoring kerb appeal without abrasive or damaging techniques.

COMMON ISSUES

The problems we solve

London’s climate and traffic take a visible toll on exposed stonework. Whatever is affecting your facade, we have a proven method to treat it.

Black Staining

Gypsum crusts caused by sulphur dioxide and airborne pollutants darken exposed stone, especially in sheltered areas.

Traffic Pollution

Diesel particulates and road grime settle into porous stone surfaces along busy London streets.

Algae

Green biological growth thrives in damp, shaded or poorly ventilated areas of a facade.

Moss

Moss takes hold on ledges, sills and horizontal surfaces where moisture collects.

Carbon Deposits

Historic soot and carbon staining from decades of pollution can darken entire elevations.

Water Staining

Poor rainwater management leaves streaking and mineral staining below sills and downpipes.

Weather Damage

Frost, wind-driven rain and freeze-thaw cycles gradually erode exposed stone detailing.

General Dirt

Everyday grime and airborne dust dull the natural colour and finish of any facade.

STONE EXPERTISE

Suitable for every natural stone type

Different stones demand different care. Our technicians select the cleaning method, pressure and chemistry to suit the specific mineral composition of your facade.

Portland Stone

London’s signature building stone, prized for its pale, even tone.

Limestone

A soft sedimentary stone that responds well to gentle, low-pressure cleaning.

Sandstone

Porous and characterful, requiring careful pressure control to avoid erosion.

York Stone

A durable sandstone popular for steps, paving and facades alike.

Granite

Extremely hard-wearing, tolerating higher pressure while retaining its polish.

Marble

Elegant and acid-sensitive, cleaned with pH-neutral, stone-safe solutions.

Travertine

Naturally textured stone that needs careful attention to its open pores.

Cast Stone

A concrete-based reconstituted stone found on many period London facades.

OUR METHOD

Our cleaning process

01

Inspection

We carry out a full facade survey, noting stone type, soiling levels, existing damage and access requirements before work begins.

02

Stone Assessment

A discreet test area confirms the safest cleaning method, pressure and chemistry for your specific stone.

03

Cleaning

Graduated steam or low-pressure cleaning lifts pollution, algae and staining without abrading the stone surface.

04

Rinse

A thorough rinse clears away loosened residue and cleaning agents, leaving the stone’s true colour visible.

05

Optional Protection

A breathable, stone-appropriate sealant can be applied to help resist future staining and biological growth.

WHY FLOORCARE LONDON

Why choose us

Stone Specialists

We work exclusively with natural and reconstituted stone, so every method we use is matched to the material in front of us.

Safe Cleaning Methods

Low-pressure steam and pH-balanced products protect delicate stonework while still lifting stubborn staining.

Commercial Equipment

Our steam and pressure systems are built for large-scale facade work, from single houses to full office elevations.

Experienced Team

Our technicians are trained across every major London stone type, from Portland ashlar to reconstituted cast stone.

Commercial stone facade cleaning

We work with property managers, facilities teams and main contractors to restore and maintain stone facades across London’s commercial estate, scheduling work around your business hours and access constraints.

Office Buildings

Schools

Apartment Blocks

Historic Buildings

Hotels

Retail Units

Restaurants

Listed Buildings

Residential stone cleaning

From a Victorian terrace to a country house entrance, we bring the same careful, stone-specific approach to residential properties across London — always with dust and mess kept to a minimum.

Victorian Houses

Luxury Homes

Entrance Steps

Georgian Houses

Garden Walls

Columns

OUR WORK

Recent stone cleaning projects

A selection of facade transformations from across London. Photographs will be added here as each project is completed.

SERVICE AREAS

Areas we cover

We clean stone facades across Central and Greater London, including:

Westminster
Chelsea
Mayfair
Kensington
Camden
Islington
Richmond
Hammersmith
Fulham
Canary Wharf
Greater London

FAQ

Frequently asked questions

Every building is different, so we price after a free site survey that considers the facade area, stone type, level of soiling and access requirements. As a guide, most residential frontages start from a few hundred pounds, while larger commercial facades are quoted per square metre once we’ve assessed scaffolding or access needs.

Yes. We use graduated, low-pressure methods and stone-appropriate cleaning agents, and always test on a discreet area first. For listed and historic buildings we work within conservation guidance and can liaise with your architect or conservation officer where required.

A typical house frontage takes one to two days. Larger commercial buildings vary depending on scaffold access, but we’ll give you an accurate timeline as part of your quote.

No, when carried out correctly. We match pressure, dwell time and chemistry to your specific stone type, avoiding the aggressive sandblasting or overly acidic treatments that can scar softer stones such as limestone and sandstone.

Yes. We use biodegradable, pH-balanced cleaning products wherever possible and always follow safe water run-off practices, particularly important on street-facing commercial buildings.

Yes, this is one of the most common issues we treat. Black gypsum crusts and traffic soiling sit on the surface of the stone and respond well to our steam and low-pressure cleaning systems.

It depends on the height and access of the building. Ground and first-floor work can often be completed from a cherry picker or ladders, while taller facades may require scaffolding, which we can help coordinate.

Most London buildings benefit from a full clean every five to ten years, though this varies with orientation, traffic exposure and whether a protective sealant has been applied.

Yes, every quote begins with a free, no-obligation site survey so we can assess the stone type, condition and best cleaning method before providing a fixed price.

Yes, we carry full public liability insurance and can provide certificates and risk assessments for property managers, landlords and commercial clients before work begins.

Yes, we offer optional breathable, stone-appropriate sealants that help resist future staining and biological growth while allowing the stone to breathe naturally.

Get Your Free Quote Today

Book a free, no-obligation site survey and find out how we can restore your building’s stone facade.

GET IN TOUCH

Request your free quote

Tell us a little about your property and we’ll come back to you with next steps — usually within one working day.

Call us

+44 7888 526686

Email us

info@floorcarelondon.co.uk

Response time

Usually within one working day

Full Name
Tell us about the stone facade, its condition and any access considerations.